Sand Springs Spray Foam Insulation Heroes logoSand Springs Spray Foam Insulation Heroes
Spray foam insulation being installed in a Sand Springs, Oklahoma home

Sand Springs, Oklahoma · Locally owned

Sand Springs Spray Foam InsulationSpray foam insulation contractors for homes, shops and commercial buildings in Tulsa County

Owner Dale Harlan and our crew install open-cell and closed-cell spray foam in attics, crawl spaces, new construction, metal buildings and pole barns from our shop on West 21st Street. We air seal and insulate in one step, so your home or building stays comfortable through Oklahoma summers and ice-storm winters.

  • ✓Free estimates
  • ✓8635 W 21st St, Sand Springs
  • ✓Mon–Fri 8am–6pm, Sat 9am–2pm

Get a Free Quote

Tell us about your project and we will get back to you, usually the same business day.

Prefer to talk? Call (918) 215-7338.

Locally owned and operated✦Open-cell and closed-cell foam✦Residential, commercial and new construction✦Free estimates

Spray foam insulation in Sand Springs

Your Local Spray Foam Insulation Contractor

Sand Springs Spray Foam Insulation Heroes is owned and run by Dale Harlan from our shop at 8635 W 21st St. We work across Sand Springs, from older homes near Charles Page Boulevard and downtown to newer houses on the wooded hills toward Keystone Lake, plus Tulsa, Mannford, Sapulpa and the rest of the west metro.

Sand Springs summers regularly pass 95°F with heavy humidity, and winter brings ice storms and hard freezes. Traditional fiberglass batt insulation slows heat but lets air move straight through every gap. Spray foam expands to fill cracks and gaps, bonds to framing and creates an air barrier and insulation layer at the same time, which is why it performs so well here.

Every project starts with a free estimate. We check for moisture, measure the area, and explain whether open-cell foam, closed-cell foam or another insulation fits your home or building. You get a written quote before any work begins.

About
Spray foam insulation contractor at work in Sand Springs, Oklahoma
Sand Springs Spray Foam Insulation Heroes logo

Dale Harlan

Owner, Sand Springs Spray Foam Insulation Heroes

Up to R-7

Per inch, closed-cell foam

6

Spray foam services

9

Communities served

Free

Estimates and quotes

Choosing the right foam

Open-Cell vs Closed-Cell Spray Foam Insulation

Both types of spray foam insulation air seal as they insulate, but they behave very differently. Here is how they compare for Sand Springs homes and buildings.

FeatureOpen-Cell Spray FoamClosed-Cell Spray Foam
R-value per inchAbout R-3.5 to R-3.8About R-6 to R-7
ExpansionExpands about 100 timesExpands about 30 times
MoistureVapor permeable, can absorb waterVapor retarder at about 1.5 inches
StrengthSoft and flexibleRigid, adds racking strength
SoundExcellent at dampening noiseGood
Best usesRoof decks, interior and exterior wallsCrawl spaces, metal buildings, garages, pole barns
Typical installed costAbout $0.45 to $0.80 per board footAbout $1.00 to $2.00 per board foot

A board foot is one square foot at one inch thick. Read more in our open-cell vs closed-cell guide.

Why spray foam works

Spray Foam vs Fiberglass: Air Sealing Makes the Difference

Fiberglass and cellulose slow heat flow, but air passes right through them and around every gap. In a typical house, air leaks at top plates, wiring holes, recessed lights, rim joists and the attic hatch can account for a big share of heating and cooling loss. That is why a home can have "enough" insulation on paper and still feel drafty.

Spray foam insulation fills those gaps as it goes on, creating an insulation layer and an air barrier at once. ENERGY STAR estimates that air sealing plus insulation can cut heating and cooling costs by about 15 percent on average. Many builders confirm the result with a blower door test, which measures how airtight a house is.

Spray foam is not always the answer. For an open attic floor with no ductwork, air sealing and blown-in fiberglass or cellulose can be the more cost-effective choice, and we will tell you when that is the case.

Spray foam vs fiberglass for Sand Springs homes

Where we use spray foam most

  • ✓Attic roof decks with ducts and HVAC equipment
  • ✓Spray foam insulation for walls in new construction and additions before drywall
  • ✓Crawl space rim joists and foundation walls
  • ✓Garages, shops and metal buildings that sweat
  • ✓Pole barns, boat and RV storage near Keystone Lake
  • ✓Commercial and industrial buildings along Charles Page Boulevard

Pricing

Spray Foam Insulation Cost in Sand Springs

Spray foam insulation cost is based on board feet: the square footage sprayed times the thickness in inches. Open-cell foam typically runs about $0.45 to $0.80 per board foot installed, and closed-cell about $1.00 to $2.00.

Typical Sand Springs projects:

  • Attic roof deck, about 1,500 sq ft with 5.5 inches of open-cell: about $3,700 to $6,600
  • 24x24 garage, about 2 inches of closed-cell on walls and roof: about $3,000 to $6,000
  • Crawl space walls and rim joists with closed-cell: about $1,500 to $3,500
  • 30x40 shop or pole barn, about 2 inches of closed-cell: about $5,500 to $11,000
  • New construction 2x4 walls with open-cell, per 1,000 sq ft of wall: about $1,600 to $2,800

Access, old insulation removal, foam thickness and code-required coatings all affect the final number. Your free estimate gives you an exact written price.

Read the Sand Springs cost guide

Why choose us

Why Sand Springs Chooses Spray Foam Insulation Heroes

  1. 01

    Locally Owned

    Dale Harlan runs the business from West 21st Street, right here in Sand Springs.

  2. 02

    Free Written Estimates

    Foam type, thickness, area and price in writing before any work begins.

  3. 03

    Moisture Checked First

    We never spray over wet decking or framing, which prevents most spray foam problems.

  4. 04

    Homes to Warehouses

    Attics, crawl spaces, new builds, garages, barns and commercial buildings.

  5. 05

    Builder Friendly

    We schedule around inspections and other trades on new construction.

  6. 06

    Honest Advice

    If another insulation is the better value for part of your project, we will say so.

How it works

What to Expect From Our Installers

1

Free Estimate

We inspect the space, check moisture and measure the area.

2

Written Quote

You get foam type, thickness, area and price in writing.

3

Prep and Spray

We mask and protect the area, then spray in proper passes.

4

Cure and Walkthrough

After curing and ventilation, we clean up and walk through the work.

Service area

Spray Foam Insulation Near Me: Sand Springs and the Tulsa Area

From our shop on West 21st Street, we serve every part of Sand Springs, from Prattville and downtown to the hills near Keystone Lake and the Osage County side of town. We also serve Tulsa, Mannford, Sapulpa, Jenks, Bixby, Glenpool, Broken Arrow and Owasso.

All service areas
Spray foam insulation questions answered for Sand Springs homeowners

Frequently Asked Questions

Sand Springs Spray Foam Insulation FAQs

Straight answers to the questions Sand Springs-area property owners ask us most. Still unsure? Call for a free consultation.

(918) 215-7338
+ How much does spray foam insulation cost in Sand Springs?
Open-cell foam typically runs about $0.45 to $0.80 per board foot installed and closed-cell about $1.00 to $2.00. A 1,500 square foot attic roof deck with open-cell is about $3,700 to $6,600, and a 24x24 garage with 2 inches of closed-cell is about $3,000 to $6,000. Your free estimate gives the exact price.
+ How much does it cost to spray foam insulate a 2,000 sq ft house?
It depends on what is sprayed. The roof deck over a 2,000 square foot single-story home is often 2,300 to 2,600 square feet, so open-cell roof deck foam commonly lands in the high four figures to low five figures. New construction walls and roof deck together usually run higher.
+ What is the downfall of spray foam insulation?
Higher upfront cost, about 24 hours of curing time when you need to stay out of the area, and the fact that it is hard to remove later. Poor installation can cause odor or gaps, which is why installer experience matters.
+ Why is it hard to sell a house with spray foam insulation?
Most concerns come from foam that hides roof decking from inspectors or was installed without documentation. Keep your invoice and product data sheets. Professionally installed, documented foam is increasingly common.
+ Why are people removing spray foam insulation?
Most removals trace back to poor installs: foam that never cured properly, foam sprayed over wet wood, or foam that hid roof problems. Checking moisture and spraying in proper passes avoids these issues.
+ What is better than spray foam insulation?
For open attic floors with no ductwork, air sealing plus blown-in fiberglass or cellulose is often a better value. For air sealing, roof decks, crawl spaces and metal buildings, spray foam usually performs best.
+ Where should you not use spray foam?
Avoid spraying over wet wood, against chimneys or heat sources without proper clearance, over recessed lights not rated for contact, or over old knob-and-tube wiring before it is evaluated.
+ Do mice chew through closed-cell spray foam?
They can, but they do not nest in it the way they do in fiberglass. Spray foam seals many gaps rodents use, and exterior openings should still be closed with steel mesh.
+ Do you run electrical before spray foam insulation?
Yes. In new construction, electrical, plumbing and HVAC should be roughed in and inspected before foam goes on.
+ What is the cheapest but most effective insulation?
For open attic floors, air sealing plus blown-in insulation is usually the cheapest effective option. For walls, crawl spaces and metal buildings, spray foam often delivers the best long-term value.
+ Do you offer free estimates?
Yes. Every project starts with a free estimate and a written quote. Call (918) 215-7338 or use the quote form at the top of the page.

Business hours, Mon–Fri 8am–6pm, Sat 9am–2pm

Ready for a Free Spray Foam Estimate?

Talk to a locally owned spray foam insulation contractor in Sand Springs. Get a free estimate and a written quote before any work begins.

Call now Get a Free Quote